Colour:
Environmentally friendly green

Frame:
2mm thick hot dipped galvanised steel frame

Panel:
Electrical panel size 250mm high x 350mm wide

Locking:
Locking pin is welded to skirt and will accommodate a standard Power Authority padlock ie: PI234

Vent:
Vent located at the top of the hood to exhaust hot air in order to maintain lower operating temperature for fuse, switch gear Etc.

Installation:
Installation is quick and easy. Refer Installation Guide Download.

Colour:
Environmentally friendly green

Frame:
2mm thick hot dipped galvanised steel frame

Panel:
Electrical panel size 450mm high x 350mm wide

Locking:
Locking pin is welded to skirt and will accommodate a standard Power Authority padlock ie: PI234

Vent:
Vent located at the top of the hood to exhaust hot air in order to maintain lower operating temperature for fuse, switch gear, etc...

Installation:
Installation is quick and easy. Refer Installation Guide Download.

Can be purchased as an empty base model, or fitted out with relevant fuse protection (quote required).

Colour: Environmentally friendly green

Door: Opening size: 320 x 305mm. Door is upward lifting for easier access

Frame: 2mm thick hot dipped galvanised steel frame

Panel: Electrical panel size 450mm high x 350mm wide x 8mm deep

Locking: Locking pin is welded to skirt and will accommodate a standard Power Authority padlock ie: PI234

Vent: Vent located at the top of the hood to exhaust hot air in order to maintain lower operating temperature for fuse, switch gear Etc.

Installation: Installation is quick and easy. Refer Installation Guide Download.

Frame:
2mm thick hot dipped galvanised steel frame. The frame can be off set to allow more mounting depth.

Panel:
Insulation panel size 700mm high x 480mm wide

Locking:
Jag is welded to skirt. Will accommodate a Power Authority padlock.

Vent:
Vent located at the top of the hood to exhaust hot air in order to maintain lower operating temperatures.

Installation:
Installation is quick and easy. Refer Installation Guide Download.

Pillars can be supplied empty complete with panel, or completely fitted out with switchgear ready to go.

Door:
Hinged on left hand side. Door opening 660mm high x 360mm wide. Comes with Vandal Resitant swing handle and 3 point locking for better security.

Frame:
2mm thick hot dipped galvanised steel frame. The frame can be off set to allow more mounting depth.

Panel:
Insulation panel size 700mm high x 480mm wide

Locking:
Jag is welded to skirt. Will accommodate a Power Authority padlock.

Vent:
Vent located at the top of the hood to exhaust hot air in order to maintain lower operating temperatures.

Installation:
Installation is quick and easy. Refer Installation Guide Download.